High-visibility PVC traffic cones in 500 mm, 750 mm, and 1000 mm heights — for road works, construction sites, and factory safety across NE India.
A safety cone — also called a traffic cone or road cone — is a portable, cone-shaped marker made from flexible PVC, weighted at the base to resist knockover by vehicle wash. The standard colour is high-visibility orange with horizontal retroreflective white or silver banding, making the cone visible to approaching drivers in daylight and at night. Safety cones are deployed in rows or staggered patterns to mark hazard zones, lane closures, temporary road diversions, construction activity areas, and emergency incident perimeters — guiding vehicle and pedestrian traffic around the hazard without the need for permanent barriers.
Multi Trade Combines stocks PVC traffic cones in 500 mm, 750 mm, and 1000 mm heights at our Guwahati counter. We supply road works contractors, state PWD departments, National Highway project teams, construction companies, factory safety officers, and event management organisations across Assam and Northeast India. Cones are available singly or in bulk quantities for large project requirements.
Road construction and maintenance contractors working on national and state highways across Assam, Meghalaya, Arunachal Pradesh, and Nagaland are the largest buyers. Every road-widening project, pothole repair operation, bridge deck resurfacing job, and drainage culvert construction requires a supply of traffic cones to set up lane closures and work-zone tapers compliant with IRC safety specifications. NHIDCL and NHAI projects in the Northeast mandate cone-based temporary traffic management as a contractual requirement.
Factory and warehouse safety teams use cones for routine indoor safety management — marking crane slew zones, spill areas, maintenance exclusion zones, and pedestrian crossing points inside facilities. Tea estates with processing factories, rice mills, plywood plants, and oil field facilities across Assam all maintain stocks of safety cones for housekeeping and emergency response.
The safety cone works alongside caution tape and safety road barriers for complete hazard demarcation. For night visibility enhancement, combine with LED cone lights or strobe beacons available from our safety equipment range at Multi Trade Combines.
| Category | Safety Equipment |
|---|---|
| Key specs | PVC traffic cone · 500 / 750 / 1000 mm |
| Material | PVC (polyvinyl chloride) |
| Heights | 500 mm / 750 mm / 1000 mm |
| Colour | High-visibility orange with reflective banding |
| Standard | IS 9844 retroreflective sheeting |
| Availability | In stock — price on request |
The IRC (Indian Roads Congress) and MoRTH guidelines for temporary traffic management on highways specify retroreflective traffic cones of at least 700 mm height for high-speed road works, and a minimum of 500 mm for urban road and footpath works. Cones should carry IS 9844 retroreflective sheeting bands (typically two bands of Class 1 sheeting, 50 mm wide) so they are visible to drivers at 100 m in headlights. The 1000 mm tall cone is recommended for works on NH stretches carrying heavy commercial traffic. Cone spacing along the taper zone is specified as 5–10 m depending on approach speed.
Yes. Standard PVC traffic cones are widely used indoors for temporary hazard marking — marking forklift no-go zones during maintenance, isolating a slippery wet floor after cleaning, marking the perimeter of an overhead crane working area, and segregating areas where overhead work is taking place. For indoor use, retroreflective banding is less critical, but high-visibility orange colour and stable base weight remain important. Mini cones (300 mm) are available for indoor warehouse use where full-size traffic cones would obstruct narrow aisles.