10-ton H-frame hydraulic press for bearing pressing, shaft straightening and bush fitting — KEAA stock available at Multi Trade Combines, AT Road, Guwahati.
The KEAA 10 Ton Hydraulic Press is the workhorse tool in any serious vehicle workshop, engineering maintenance bay or mechanical fabrication shop. Ten tonnes of controlled, downward ram force handles the jobs that hammering cannot: pressing wheel bearings squarely into hubs without damaging the bearing race, removing differential pinion bearings without destroying the carrier, straightening crane hooks and bent chassis components, and pressing rubber bushes into suspension arms precisely and squarely. The H-frame steel construction gives a rigid, stable work platform at a height that suits both floor-level and bench-mounted operations.
In Guwahati's large commercial vehicle repair sector — the city is the logistics gateway for the entire Northeast — 10-ton presses are fundamental workshop equipment. Truck-fleet workshops, axle repair specialists and earthmoving-equipment service centres along NH-27 and NH-17 corridors all need bearing press capability that a hammer and drift cannot match. Multi Trade Combines stocks KEAA presses, jacks and garage equipment at our AT Road counter, with delivery across Assam and the Northeast.
Stocked at Multi Trade Combines, AT Road, Guwahati
A hydraulic press works most effectively alongside a set of press adaptor rings — circular steel collars in different diameters that seat precisely on the bearing outer race or bush flange without damaging the component being pressed. Multi Trade Combines can advise on compatible adaptor kits for the KEAA press frame. For shops that also need lifting capability, the KEAA 4-ton low-profile floor jack and our 2-ton foldable engine crane complete a capable garage bay. For structural straightening of larger frames, a 20-ton press is the next step up — ask us if your requirement exceeds 10 tons and we will recommend the appropriate capacity. Genuine stock since 1991; price on request by phone or WhatsApp.
| Brand | KEAA |
|---|---|
| Category | Garage & Automation |
| Key specs | Workshop press, 10-ton capacity |
| Availability | In stock — price on request |
| Ram capacity | 10 tons |
| Frame type | H-frame steel |
| Operation | Manual hydraulic pump |
A 10-ton hydraulic press is the standard capacity for pressing wheel bearings and hub bearings in and out of axle housings, pressing bush and sleeve fits for gearboxes and steering knuckles, straightening bent shafts up to about 40 mm diameter, and pressing pulley hubs onto shafts. For heavier bearing jobs on trucks and off-highway equipment, a 20-ton or 30-ton press is more appropriate. Call +91 91812 13332 for guidance.
Yes — KEAA workshop presses include a hydraulic pressure gauge that lets the operator relate pump pressure to approximate ram force for controlled pressing operations. The press frame is H-frame steel with an adjustable bed to accommodate varying job heights. WhatsApp +91 76359 98826 to confirm current stock at our Guwahati counter.