Fully stainless worm-drive and T-bolt hose clamps for automotive, industrial and fluid-system connections — in stock at Multi Trade Combines, AT Road, Guwahati.
Hose clamps are the unsung hardware that keeps fluid systems sealed. A radiator hose that slips its clamp during a hill climb brings the vehicle to a halt within minutes; a fuel-line clamp that corrodes loose on an outboard motor creates a fire risk; a coolant hose joint on a diesel genset that weeps under temperature cycling causes imperceptible topping-up work every week until the engine overheats. The right clamp, correctly sized and properly torqued, eliminates all of these failures. Multi Trade Combines stocks fully stainless (W4) worm-drive clamps and heavier-duty T-bolt clamps in a range of sizes at our AT Road, Guwahati counter — genuine hardware at counter price.
Worm-drive clamps are the workshop staple: quick to fit with a screwdriver or socket, adjustable over a band range (e.g., 12–20 mm, 20–32 mm, 32–50 mm), and adequate for radiator coolant, fuel, water-supply and light air hose applications. T-bolt clamps provide a more rigid, high-torque grip that is specified for silicone intercooler hoses on turbocharged engines, industrial compressed-air fittings and any hose connection that must hold under pulsating pressure without creeping loose. We stock the size range that covers automotive and general industrial applications — describe your hose OD and application and our counter staff will confirm the right clamp type and size.
In stock at Multi Trade Combines, AT Road, Guwahati — serves Northeast India
Vehicle workshops servicing Guwahati's large commercial fleet — trucking firms running NH-27 and NH-17, bus operators crossing the hill routes to Shillong and Dimapur — replace hose clamps routinely during coolant hose and intercooler services. Diesel generator service teams across Assam's industrial estates fit new worm-drive clamps when replacing ageing coolant hoses on standby power sets. Tea-factory maintenance engineers use T-bolt clamps on high-pressure wash-down lines and on the steam condensate piping in withering and drying sections. Food and beverage processors in Guwahati's expanding manufacturing belt prefer fully stainless W4 clamps over cheaper galvanised alternatives to avoid rust contamination. All sizes are available at our Guwahati counter; small quantities for workshop stock and larger project quantities equally welcome.
| Category | Industrial Spares |
|---|---|
| Key specs | SS worm-drive & T-bolt |
| Availability | In stock — price on request |
| Material | Stainless steel 304 (W4 standard) |
| Types | Worm-drive (low-to-medium pressure), T-bolt (high pressure) |
| Size range | Multiple sizes — confirm requirement at counter |
A worm-drive hose clamp uses a threaded band tightened by a screw worm — suited for low-to-medium pressure hose connections such as radiator hoses, fuel lines and water supply fittings. A T-bolt clamp uses a bolt through a heavy-section band and provides higher and more uniform clamping force, essential for high-pressure intercooler hoses, silicone charge-air pipes and industrial pressure fittings. Both are stainless steel for corrosion resistance. Call +91 91812 13332 for size and type guidance.
Our SS worm-drive clamps are W4 standard (fully stainless band and housing) using 304 stainless steel, which suits the monsoon-humidity environment of Northeast India far better than W1 (carbon steel with SS band only). For marine or chemical environments, 316 SS clamps are available on request. WhatsApp +91 76359 98826 for stock confirmation by size range.