Genuine Bosch GSH 5 SDS-max demolition hammer — 5 kg, 1100 W, for chiselling, tile removal and concrete breaking. In stock at Multi Trade Combines, authorised Bosch dealer, Guwahati.
The Bosch GSH 5 is a professional-grade SDS-max demolition hammer in the 5 kg weight class, designed for medium-duty chiselling and breaking work on construction and renovation sites. At 1100 W rated input power, it delivers the consistent impact energy needed to break concrete screeds, chip off thick-set floor tiles, chisel through brick and blockwork for electrical conduit, cut expansion joints in screed, and score mortar joints for repointing. The SDS-max chuck accepts the full range of Bosch SDS-max flat chisels, pointed chisels, scaling chisels and clay spades for specialist applications.
In Guwahati's active renovation and new-construction market — commercial office strip-outs, apartment kitchen and bathroom refits, factory floor re-levelling and residential extensions — the 5 kg class demolition hammer is the right balance between operator fatigue and chiselling performance for a single worker holding the tool vertically or horizontally for extended periods. Multi Trade Combines is an authorised Bosch dealer supplying genuine Bosch power tools from our AT Road, Guwahati counter. Genuine Bosch tools come with the manufacturer's warranty; counterfeit or grey-market tools available elsewhere in Guwahati do not.
Authorised Bosch dealer — Multi Trade Combines, AT Road, Guwahati
Multi Trade Combines stocks the full Bosch GSH demolition hammer range: the GSH 5 (5 kg, 1100 W) for medium renovation work, the GSH 11 E (11 kg, 1500 W) for heavier road-level concrete breaking and structural demolition, and the GSH 16-30 (16 kg, 1750 W) for the largest infrastructure demolition tasks. Choosing the right model matters: under-specifying leaves you with a slow and frustrating demolition rate; over-specifying with a 16 kg hammer for tile removal leaves the operator exhausted. For most building-trade renovation work — floors, walls, screed, tiles and light concrete — the GSH 5 is the practical choice. For road-quality concrete, reinforced columns and heavy foundations, the GSH 11 E is the step up. The GSH 16-30 is for road-breaking and heavy infrastructure. All are in stock at our Guwahati counter — call for current price on request.
| Brand | Bosch |
|---|---|
| Category | Power Tools |
| Key specs | 5 kg class · SDS-max · 1100 W |
| Availability | In stock — price on request |
| Weight | 5 kg (approx.) |
| Power input | 1100 W |
| Chuck type | SDS-max |
The Bosch GSH 5 is a pure chiselling demolition hammer — it delivers impact energy only, without any rotation of the bit. Rotary hammers combine rotation with impact for drilling in concrete. The GSH 5 is chosen for breaking, chiselling and demolition work: breaking concrete floors, chipping off tiles, trenching in masonry walls for conduit. The SDS-max tooling used by the GSH 5 is heavier-duty than the SDS-plus bits used in smaller rotary hammers. Call +91 91812 13332 for stock availability.
At 5 kg class with 1100 W motor output, the GSH 5 handles medium demolition work — chipping concrete screed, breaking lightweight block walls, trenching through brick masonry, and removing floor tiles. For heavily reinforced structural concrete breaking where sustained force on dense aggregate concrete is needed, the heavier GSH 11 E (11 kg, 1500 W) or GSH 16-30 (16 kg, 1750 W) are more appropriate. WhatsApp +91 76359 98826 for model comparison and availability.