For a borewell: choose a Kirloskar submersible pump — it sits inside the borewell casing below the water level and lifts water directly. For an open well, sump or tank: choose a Kirloskar monoblock pump — it sits above ground and draws water up by suction. Multi Trade Combines, AT Road, Guwahati is an authorised Kirloskar dealer — the counter team will confirm the HP rating and pump diameter to match your borewell casing and head requirements.
| Application | Borewell | Open well / sump / tank |
|---|---|
| Pump type | Submersible pump | Monoblock pump (centrifugal) |
| Installation | Lowered into borewell casing below water | Mounted above ground, suction pipe into water source |
| Prime needed? | No — always submerged | Yes — must be primed on first start (some are self-priming) |
| Max suction lift | Not applicable (pump is submerged) | 7–8 metres practical maximum |
| Discharge head | Determined by HP and impeller — up to 100+ metres | Typically up to 30–50 metres for monoblock |
| Noise | Very quiet — pump is underground | Audible motor noise |
| Maintenance access | Pull pump up from borewell | Easy access — surface mounted |
| Casing diameter fit | Must match casing: 4" pump for 4" borewell | Not constrained by casing |
| Kirloskar example | KS 4 series submersible | STAR-1, CHHOTU, KSB monoblock range |
Northeast India has specific water supply characteristics that affect pump selection:
See the full pumps and motors catalogue for available models and ratings.
To get the right Kirloskar pump quickly:
The correct HP depends on your total head (depth of water level + height to your overhead tank) and required flow rate (litres per hour). A rough rule for residential use: up to 80 feet total head — 0.5 HP; 80–150 feet — 1 HP; 150–250 feet — 1.5–2 HP. Always buy slightly above the calculated requirement — running a pump at 100% head continuously reduces pump life. Confirm the borewell casing diameter (4 inch or 6 inch) to choose the correct pump body size.
A monoblock pump is a self-contained unit where the motor and pump are on a single shaft — compact, easy to install, no coupling to maintain. A centrifugal pump (with separate motor) allows the motor and pump to be replaced independently, which suits larger industrial applications. For residential and light commercial open well or sump applications, the Kirloskar monoblock is the practical choice — simpler, reliable, and widely serviced in NE India.
Yes — Multi Trade Combines, AT Road, Guwahati is an authorised Kirloskar dealer for pumps and motors. We provide warranty service and post-warranty service for Kirloskar pumps in Assam and the Northeast. Genuine spare parts (impeller, seal kit, capacitor) are stocked at our counter. For remote districts, we can courier spare parts — call or WhatsApp with your pump model number for a quote.