Genuine TAPARIA bolt cutters in 14" to 36" jaw sizes — alloy steel, induction-hardened for rebar, chain, bolt and wire cutting. Authorised dealer stock in Guwahati.
TAPARIA bolt cutters are the contractor's choice for cutting bolts, rods, wire rope and padlock shanks on sites and in workshops where power tools are either unavailable or impractical. The compound-lever action multiplies hand force through two sets of pivots, concentrating energy at the induction-hardened jaw tip to shear through mild steel, soft alloy and wire in a single squeeze — no sparks, no power supply required, no noise complaint.
TAPARIA manufactures bolt cutters across five jaw-opening sizes from 14 inches (for wire and small section work) through 36 inches (for heavy chain links, thick rebar and large bolts). The alloy steel jaws are replaceable on larger models, extending tool life considerably. PVC-covered handles reduce fatigue on extended cutting sessions. Multi Trade Combines is an authorised TAPARIA dealer in Guwahati — genuine Taparia tools, not market copies with the same label. Stock covers the full size range; call ahead for the specific jaw-opening size you need.
Authorised TAPARIA dealer — AT Road, Guwahati
Electrical contractors cutting armoured cable and galvanised wire on power distribution projects, fencing contractors installing and tensioning barbed wire and chain link across tea estates and agricultural boundaries, construction contractors trimming rebar tails and cutting anchor bolt excess on slab pours — all are regular bolt cutter users. Security and lock-out management teams carry bolt cutters for emergency access. The 24-inch size is the most versatile for construction site use; the 30-inch handles most structural steel section work with manageable effort. Taparia's reputation for consistent jaw hardness means fewer blade replacement cycles compared with cheaper alternatives. Pair with TAPARIA wire cutters for the lighter wire cutting work alongside bolt cutter duties in your toolkit. Ships from our Guwahati counter to any Northeast state.
| Brand | TAPARIA |
|---|---|
| Category | Power Tools |
| Key specs | 14" / 18" / 24" / 30" / 36" jaw range |
| Availability | In stock — price on request |
| Jaw material | Alloy steel, induction hardened |
| Grip | PVC/rubber insulated handles |
A 14-inch TAPARIA bolt cutter handles soft wire and thin rods up to about 5–6 mm. For cutting M10 (10 mm) mild steel bolts you need at minimum an 18-inch or 24-inch model; for harder steel or larger section, a 30-inch or 36-inch model is safer and easier. As a rule, go larger than you think you need — the extra leverage reduces effort and protects the blade. Call +91 91812 13332 to confirm stock sizes.
Yes — Multi Trade Combines is an authorised TAPARIA dealer stocking genuine Taparia bolt cutters, spanners and hand tools. We do not sell market copies or look-alike brands. Genuine Taparia tools carry the brand's quality markings and are made to IS standards. WhatsApp +91 76359 98826 to confirm current stock and jaw-range availability.