Genuine Bosch 2200 W metal cut-off chop saw — clean, fast, square cuts in angle iron, flat bar, and hollow sections for fabrication and site work.
The Bosch GCO 220 is a 2200 W professional metal cut-off saw, also known as a chop saw or abrasive cut-off machine, taking a 355 mm (14 inch) bonded abrasive disc. It is designed for fast, accurate cutting of mild steel sections — angle iron, flat bar, round bar, hollow sections, conduit, and rebar — in fabrication workshops, on construction sites, and in industrial maintenance environments. The pivoting arm mechanism brings the rotating disc straight down onto a clamped, fence-registered workpiece for consistent square cuts across repeated pieces.
Multi Trade Combines is an authorised Bosch dealer in Guwahati. The GCO 220 is widely used by steel fabricators, civil contractors, electrical contractors, and maintenance workshops across Assam and Northeast India. At 2200 W, it is among the more powerful abrasive cut-off saws in the 355 mm class — cutting 50 mm round bar and 50 x 50 mm angle iron in a single clean pass without stalling or wheel glaze. Its robust construction is well-suited to the demanding conditions of Northeast India's fabrication and construction environments.
Structural steel fabrication workshops in Guwahati's Amingaon, Sarusajai, and Chandrapur industrial areas use the GCO 220 as a standard piece of equipment for cutting structural sections to length. Gates, grills, and window frames — a major product of the Guwahati mild steel fabrication sector — require fast, accurate bar cutting that the GCO 220 delivers all day on the workshop floor.
Civil contractors on building and infrastructure sites use the GCO 220 for cutting rebar to length during reinforcement bar bending work, cutting anchor bolt stock, and shortening conduit and pipes to fit. MEP contractors use it for pipe and conduit work. Oil field maintenance workshops in Jorhat, Sibsagar, and Duliajan use it for routine steel cutting during equipment overhaul and structural maintenance.
The GCO 220 pairs with Bosch cutting wheels (the 355 mm abrasive cut-off discs designed for this machine) and angle grinders for grinding cut ends and weld bevels. For welding follow-on work, ESAB electrodes and welding machines are also available from Multi Trade Combines, Guwahati — making us a single source for both cutting and joining.
| Brand | Bosch |
|---|---|
| Category | Power Tools |
| Key specs | 14" · 2200 W · 355 mm cut-off |
| Power | 2200 W |
| Disc diameter | 355 mm (14 inch) |
| Speed | 3800 rpm |
| Application | Metal bar, angle, section cut-off |
| Availability | In stock — price on request |
The Bosch GCO 220 is a 2200 W metal cut-off saw using a 355 mm bonded abrasive disc — it is designed for cutting mild steel sections: angle iron, flat bar, round bar, hollow square and rectangular sections, conduit, threaded rod, and small I-beams. It is not designed for cutting stainless steel (which requires a stainless-specific disc), aluminium (requires a TCT blade and slow speed), or masonry (which requires a stone disc on a slow-speed machine). For cutting non-ferrous metals or masonry, a different tool or disc specification is required. Always check the disc marking matches the material being cut.
A chop saw (metal cut-off saw) like the GCO 220 mounts the disc on a pivoting arm with a fixed fence and a clamp — the operator presses the rotating disc straight down onto the clamped workpiece for a precise, square cut with both hands on the handle and the workpiece fully secured. An angle grinder is hand-held and requires the operator to guide the cutting disc along a marked line while maintaining disc angle, pressure, and both hands on the tool. Chop saw cuts are faster, squarer, and safer for repetitive cutting of bar stock and sections; angle grinders are more versatile for access in tight locations or for grinding operations.