Genuine Bosch 355 mm bonded abrasive metal cutting wheel for chop saws — consistent cut quality and safe performance for high-volume fabrication and site steel cutting.
The Bosch 355 mm (14-inch) cutting wheel is a bonded abrasive disc for use on 355 mm metal chop saws, also known as cut-off machines or abrasive chop saws. The disc consists of aluminium oxide abrasive grain bonded with a resin matrix and reinforced with fibreglass mesh for structural integrity at high rotational speeds. When mounted on a chop saw, the rotating disc cuts through mild steel sections — angle iron, flat bar, round bar, hollow sections, threaded rod, and mild steel plate — by abrasive action rather than sawing, producing a fast, clean cut with no set-up of cutting fluid required.
Multi Trade Combines is an authorised Bosch dealer in Guwahati and stocks Bosch 355 mm cutting wheels for the fabrication and construction market in Northeast India. Genuine Bosch cutting wheels are balanced, dimensionally consistent, and manufactured to the maximum operating speed marked on the blotter — ensuring they perform safely on Bosch and compatible chop saws without dangerous vibration or unexpected disc failure.
Steel fabrication workshops in Guwahati's industrial areas — Amingaon, Sarusajai, Satgaon — use 355 mm chop saws as primary cutting machines for angle iron, flat bar, and hollow sections used in gates, grills, structural frames, and agricultural equipment manufacturing. A well-stocked fabrication workshop goes through several 355 mm cutting wheels per week, making consistent availability and fair pricing critical. Multi Trade Combines supplies these wheels in quantity to workshop accounts.
Civil contractors and site fabricators on building construction projects in Assam use the chop saw and cutting wheels for rebar-to-length cutting, conduit preparation, and anchor bolt shortening. Maintenance workshops at ONGC, NEEPCO, and tea estate engineering departments use 355 mm cut-off machines for routine steel cutting during overhaul and modification work.
The Bosch 355 mm cutting wheel pairs directly with the Bosch GCO 220 Chop Saw, which we also stock. For angle grinder cutting, the smaller 4-inch (100 mm) Bosch cutting wheel is the companion consumable — also available at our counter. Both ensure you have genuine Bosch cutting consumables matched to genuine Bosch machines from one source in Guwahati.
| Brand | Bosch |
|---|---|
| Category | Power Tools |
| Key specs | Bonded abrasive · metal cut-off |
| Diameter | 355 mm (14 inch) |
| Bore | 25.4 mm |
| Thickness | 3.0 mm (standard) |
| Application | Mild steel cut-off on 355 mm chop saws |
| Availability | In stock — price on request |
The 355 mm (14-inch) bonded abrasive cutting wheel is designed for use on 355 mm metal chop saws (cut-off machines) — such as the Bosch GCO 220 and similar bench-mounted abrasive cut-off saws. The wheel has a 25.4 mm (1 inch) bore and a standard arbour for these machines. It is not interchangeable with portable angle grinders, which use much smaller wheels (100 mm, 115 mm, or 125 mm). Always verify the machine spindle speed matches the wheel's maximum operating speed marked on the blotter — never use a wheel whose maximum speed is lower than the machine's free-running RPM.
The lifespan of a bonded abrasive cutting wheel depends on the material being cut, the cut depth per pass, the machine condition, and the material hardness. As an approximate guide, a genuine Bosch Expert or Standard-series 355 mm cutting wheel will cut 50–100 standard mild steel sections (50 x 50 x 5 mm angle iron) before the wheel diameter reduces to a point where it should be replaced. Harder materials (stainless steel, hardened steel) exhaust the wheel faster. Forcing the wheel (excessive downward pressure), using it on the wrong material, or cutting with the side of the wheel (not permitted on cut-off wheels) all dramatically reduce lifespan and create safety risk. Genuine Bosch wheels offer consistent performance and dimensional stability throughout their life.