For a low-yield borewell, choose a 4-inch 0.5 HP or 1 HP Kirloskar submersible pump with built-in dry-run protection — it handles low water levels without burning out. Multi Trade Combines stocks authorised Kirloskar pumps at AT Road, Guwahati with delivery across Northeast India.
A low-yield borewell recovers water slowly — typically less than 1,000 litres per hour. If you run a standard high-capacity pump in such a borewell, it draws the water column down faster than the aquifer can refill, leading to the pump running dry. Dry running overheats the motor and causes premature failure.
The solution is a slow-speed, low-discharge pump rated to match the borewell's actual yield, combined with dry-run protection that cuts power if the water level drops too low. For most residential and small commercial borewells in Assam and Northeast India, a 4-inch bore pump in the 0.5–1 HP range is the correct starting point.
Kirloskar submersible pumps are the dominant choice for borewells across India, including Northeast India, for good reasons: robust stainless-steel construction, wide voltage tolerance (useful in areas with supply fluctuations), and a well-established service network. Their 4-inch range covers heads from 20 to 160 metres, making them suitable for shallow to medium-deep borewells in the Brahmaputra valley and hill districts.
Check our pumps and motors catalogue for available Kirloskar models. For very low yield borewells (below 500 LPH), ask our counter team — we can help size the right pump and recommend a float switch or controller to add a second layer of dry-run protection.
Head (lift): Measure your borewell depth plus the height to your overhead tank. Pick a pump whose maximum head comfortably exceeds this total by at least 15–20%.
Voltage protection: Northeast India's rural areas often see voltage fluctuations. A voltage stabiliser or an auto-cutoff controller protects the pump motor and extends service life.
Professional installation: Submersible pumps need correct cable sizing and a control panel — our team can advise on the full setup. WhatsApp or call us for a complete solution including pump, panel and accessories.
For a 200-foot (60 m) depth borewell you need a pump rated for at least 70–80 m total head (depth + overhead tank height). A Kirloskar 1 HP or 1.5 HP 4-inch submersible pump typically covers this range — our counter team will help you size correctly.
Most Kirloskar 4-inch submersible pumps include thermal overload protection; for automatic dry-run cutoff, add a dry-run controller or float switch — we supply these at our Guwahati counter.
Multi Trade Combines on AT Road, Guwahati stocks authorised Kirloskar submersible pumps. Call +91 91812 13332 or WhatsApp +91 76359 98826 for current models, pricing and delivery to your location in Assam or Northeast India.